Tabla de contenido
Idiomas disponibles
Idiomas disponibles
QuickTips
: [] PIP window
is black
with no picture:
1. Check
cable
connections.
2. Make
sure VCR is
turned
on.
3. Select another
channel
on your VCR.
[] Same picture
appears
in Big and Small
windows.
Set VCR
m TV mode.
: [] 7b view two TV
programs
or wat¢]7
a TVprogram
and
prerecorded
tape at
file same time, fi)llow
steps on this page
and
chart on pa,qe 15.
PIP KEYS
: [] Use the SWAP key w
erchange
programs
between
the windows.
: [] Use the LOCATION
key to change
the
position
o[ the small
window
(Top: L/R
or
Botwm:
L/R).
i [] Use the
QUiK
FREEZE
k:Ly to stop the
action
(see page
15).
:[]Use the SELECT
key
ro choose
the PIP
video source
(Video l,
Video2,
or TV RF
Signal).
Needhelp?
Visit our Website at
www.sanyoc|v.com
or Call1-800-877-5032
PICTURE-IN-PICTURE
(PIP) OPERATION
For PIP to function
you must connect
two signals
to the TV. (Use the TV's 75 ohm input
and A/V inputs.)
Connect
VCR (or other accessory
equipped
with a video
output jack) to
the TV's
audio video jacks as shown on pages 12 and 13. If you are using a satellite
dish,
you must connect
a cable system
or antenna
with the satellite
to use the PIP feature.
For
operation
with Cable Box, see chart on page 15.
USING PiP TO ViEW TWO'IV PROGRAMS
Note:
The following
steps correspor_d
to rmmbers
or_ the Remote
Corffrol art below.
1. Switch
VCR and television
ON.
2. Press PIP ON/OFF
key.
Set VCR to TV mode, if necessary.
3. Select
channel
for big window.
4. Press SELECT
key to select Videol
or Video2
screen.
S. Press VCR
key.
Note:
If the remote
control
cannot
be programmed
to
operate
your VCR, you must use the VCR's
remote
to perform
VCR functions.
6. Select
channel
on VCR for small window.
USING PiP TO VIEW TV PROGRAM
AND PRERECORDED TAPE
Note:
The following
steps do not have corresponding
reference
numbers
on the remote
control
art.
1. Set TV channel
to match output of VCR (Channel
3 or 4).
2. Insert prerecorded
tape into VCR.
3. Press PLAY, if necessary
(wait for tape to load).
4. Set VCR to TV mode.
Note:
When the remote
control
is in the VCR mode, the
INPUT
key works like the TV/VCR
key
on the VCR.
VCR set to VCR mode.
Same image appears in
both windows.
VCR set to TV mode.
Different images appear
in each window.
5. Press SWAP
key to view PIP image
in big window.
Platy
B
_
M
/
Tabla de contenido
