Zodiac AquaLink PDA Manual De Uso página 37

VSP SETTINGS
PUMP MODEL
PUMP APPLICATION
SCALE/MIN-MAX
SPEED/LABELS
PRIME
Highlight an item
and press SELECT
6.15.10 To Set the Priming Duration
This menu allows for the user to set the length of time the priming takes place (1-5 minutes).
In the VSP SETTINGS menu, highlight PRIME and press SELECT. Use the UP/DOWN arrow keys to highlight
the desired pump, then press SELECT. Use the UP/DOWN arrow keys to highlight SET DURATION, then press
SELECT. Use the UP/DOWN arrow keys to set value, the press SELECT.
VSP SETTINGS
PUMP MODEL
PUMP APPLICATION
MIN-MAX SETTINGS
SPEED/LABELS
PRIME
Highlight an item
and press SELECT
6.15.11 Filtration Mode
a) Manual Operation:
Setting speeds by turning ON auxiliaries that have speeds assigned to them.
1. The pump is set to the speed that is assigned to the auxiliary. The exception to this rule will be when the pool/
spa heater, solar heat, or heat pump is ON. To protect the heater, solar panels, or heat pump we do not allow
the user to select a lower speed than the heater and solar speed settings while they are ON.
2. If you have several auxiliaries that have speeds assigned and if they are all ON, and you then turn OFF one of
the auxiliaries, the pump will be set to the highest speed that is assigned to any of the auxiliaries that are ON.
Once again, if the pool/spa heater, solar heat, or heat pump is ON, we do not allow the user to select a lower
pump speed.
Adjusting speeds from the "Other Devices" or "Equipment On/Off" screen.
1. On this screen you can adjust the pump to whatever speed you desire, however the pump will only stay at the
speed for that manual ON time. The manual adjust pump speeds are temporary, and not saved - so if you turn
the pump OFF and then ON again, the pump will revert back to the default values.
AquaLink PDA | Installation and Operation Manual
®
PRIME SETTINGS
PUMP 1
PUMP 2
PUMP 3
PUMP 4
Highlight an item
and press SELECT
PRIME SETTINGS
PUMP 1
PUMP 2
PUMP 3
PUMP 4
Highlight an item
and press SELECT
ENGLISH
PRIME SETTINGS
PUMP 1
SET SPEED
SET DURATION
Highlight an item
and press SELECT
PRIME SETTINGS
PUMP 1
SET SPEED
SET DURATION
Highlight an item
and press SELECT
Page 37
SET PRIME SPEED
(RPM)
2500
Use ARROW KEYS to set
value. Press SELECT to
continue
SET PRIME TIME
(MINUTES)
1
Use ARROW KEYS to set
value. Press SELECT to
continue