Tabla de contenido
Idiomas disponibles
Idiomas disponibles
prevents franking at excessive values. If the
programmed limit is reached or exceeded dur -
ing a postage calculation or a value setting, a
"HIGH VALUE" warning appears in the value
indicator field. The system then remains
blocked for franking until the warning is ack-
nowledged by pressing the value indicator
field. Following the next franking, the system
6
is again blocked. Press again after each frank-
ing to override.
5.6
"ATTN CREDIT" display *
If the remaining credit falls below 25% of the
total available credit after the last credit
loading, an "ATTN CREDIT" warning signal
appears in the value indicator field (only for
countries having remote postage resetting).
See section 5.9.20 to carry out a credit
loading.
5.7
No credit loaded *
If a franking value is set and there is insuffi-
cient credit (for countries having remote post -
age resetting), you will not be able to frank.
This condition is shown on the display with
"No Credit Loaded". To reload, see section
5.9.20.
5.8
Stamping die switch-on,
switch-off *5.8.1
switch-on/off *
In some countries switching off the date and
location stamp when franking is permitted.
Procedure:
• Press the date stamp field.
� The date stamp is switched off.
� Instead of the date, "OFF" appears.
• Again press the date stamp field.
� The date stamp is switched on again.
� The current date is again displayed.
5.8.2
Clichés switch-on/off *
Where permitted, the advertising cliché can
be switched off as follows:
• Press the "ADVERT. 2" button (2, for ex-
ample, stands for an ad cliché number).
� Advertising message is switched off.
� "OFF" appears instead of "2".
• Press the "ADVERT. OFF" button.
� Advertising message is switched on
again.
� "2" appears instead of "OFF".
See section 6 for selecting another advertis -
ing cliché stored in the system.
5.8.3
Depending on the country-specific postal re-
gulations and system configuration, additional
print clichés such as "Registered", "Express",
"Printed matter", etc., can be selected. When
franking with the "Automatic tariff calculation"
menu, the additional print clichés required are
automatically set and displayed in both button
fields at the upper left (country-dependent).
When using the "Fixed values" and "Keypad"
working programs, switch the additional
clichés on or off using the upper left button
fields. Depending on the configuration, you
can select among a maximum of eight diffe-
rent print clichés by repeatedly pressing the
"PRINT" button. The print cliché selected is
printed to the left of the advertising message
on the mail items. You can select one additio-
nal print cliché using the button to the right.
The button is labelled appropriately, (e.g. "A").
This stamp is positioned on the mail item
between the value and the date/location
stamp.
5.9
Three Info/Setup menus are available to help
you carry out certain system settings and un-
derstand the system information you need.
The first two menus are available to all ac-
Date
count numbers. The third menu allows special
functions and thus can only be called up from
the highest account number by the person re-
sponsible for the system. This also applies to
certain functions of the second menu, which
can also be selected only via the highest ac-
count number.
5.9.1
The three Info/Setup menus can be called up
and exited from a working menu as follows:
• Press the "INFO/SETUP 1" button.
� Page 1 of the Info/Setup menu.
• Press the "INFO/SETUP 2" button.
� Page 2 of the Info/Setup menu.
• If you have used the highest account num-
ber, press the "INFO/SETUP 3" button.
� Page 3 of the Info/Setup menu.
By repeatedly pressing the "CE" button you
can switch among the three pages within the
Setup menu, to page 3, to page 2, and back
to page 1, etc.
You can exit the Setup menu from any page
by pressing the "START UP" button and re-
turn to the "Start" menu for entry of the ac-
count number and password.
Additional Print Clichés
switch-on/off *
System settings
Entering/exiting menus
Capítulos
Tabla de contenido
