Leckey Mygo+ Manual De Usuario página 41

SECTION 9.20:
TILT-IN-SPACE
The tilt-in-space can be angled while the
user is in the seat. Before you adjust the
tilt-in-space angle of the seat, always
ensure the pelvic harness is secured
preventing the user from sliding forward
in the seat.
To adjust the tilt angle press the lever
under the seat base
selected the angle you require, by simply
removing your hand from the lever,
the chair will be locked in position.
The tilt-in-space should be locked off
while the user is in the seat. To lock the
lever twist the pull pin to the right hand
side of the lever and the pin will pop into
position. You may have to lift the lever
slightly to allow it to lock. To unlock pull
the pin out and rotate 90 degrees,
the lever can then be operated.
Always keep the tilt-in-space
lever in the locked position to
prevent accidental actuation
of the lever which could cause
the seat unit to jolt and possibly
cause injury to the child.
Please use handle bars when
operating tilt-in-space.
Always check with your
therapist that the use of
tilt-in-space will not cause
any obstructions to the
child's airways.
. Once you have
A
A
Leckey Mygo+ User Manual p41
SECTION 9.21:
PELVIC HARNESS
The Pelvic Harness is attached by sliding
the hip guides
A
outer face of the harness. It is adjusted to
the desired position by securing it to one
of the snap fasteners
hip guide bracket. The buckle on the tie
down strap is clipped into a receiving
buckle on either side of the seat base.
C
Finally secure the pelvic harness by
attaching the centre plastic buckle
If using the seat outdoors and your child
is wearing a coat, position the pelvic
harness under the coat.
Always attach the pelvic
strap first before making
any other adjustments.
into the pockets on the
on the adjustable
B
A
B
C
D
.
D