Stihl HT 102 Manual De Instrucciones página 15

Pull-in occurs when the chain on the
bottom of the bar is suddenly stopped
when it is pinched, caught or encounters
a foreign object in the wood. The
reaction of the chain pulls the pole
pruner forward.
Pull-in frequently occurs when the chain
is not rotating at full speed before it
contacts the wood.
To Avoid Pull-in
1. Be alert to forces or situations that
may cause material to pinch the
chain at the bottom of the bar.
2. Always start a cut with the chain
rotating at full speed.
B = Pushback
Pushback occurs when the chain on the
top of the bar is suddenly stopped when
it is pinched, caught or encounters a
foreign object in the wood. The reaction
of the chain may drive the pole pruner
rapidly straight back toward the
HT 102, HT 103, HT 132, HT 133
operator. Pushback frequently occurs
when the top of the bar is used for
cutting.
To Avoid Pushback
1. Be alert to forces or situations that
may cause material to pinch the
chain at the top of the bar.
A
2. Do not cut more than one limb at a
time.
3. Do not twist the bar when
withdrawing it from an underbuck
cut because the chain can pinch.
MAINTENANCE, REPAIR AND
STORING
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly, STIHL may deny coverage.
WARNING
STIHL recommends the use of STIHL
replacement parts for maintenance and
repair. Use of parts manufactured by
others may be extremely dangerous and
could result in serious or fatal injury.
Strictly follow the maintenance and
B
repair instructions in the appropriate
sections of this instruction manual.
Please refer to the maintenance chart in
this manual.
WARNING
Always stop the engine and make sure
that the chain is stopped before doing
any maintenance or repair work or
cleaning the power tool. Do not attempt
any maintenance or repair work not
described in this instruction manual.
STIHL recommends that you have such
work performed by your STIHL servicing
dealer.
Wear gloves when handling or
performing maintenance on the cutting
attachment.
WARNING
To reduce the risk of fire and burn injury
or property damage, use only spark
plugs authorized by STIHL. Always
press spark plug boot snugly onto spark
plug terminal of the proper size. (Note: If
terminal has detachable SAE adapter
nut, it must be securely attached.) A
loose connection between spark plug
terminal and the ignition wire connector
in the boot may create arcing that could
ignite combustible fumes and cause a
fire. Keep the spark plug clean and
make sure the ignition lead is in good
condition.
WARNING
Never test the ignition system with the
ignition wire boot removed from the
spark plug or with a removed spark plug,
since uncontained sparking may cause
a fire.
English
13