Sunbeam FPSBHS0404 Manual De Instrucciones página 6

U
sing as a
To attach the Hand Mixer to the Stand,
tilt the Stand's cradle (the top of the Stand
that holds the Mixer) back and insert
the Mixer's front into the 2 slots. Then
push the back of Mixer until its snaps
into place. To remove the Mixer from
the Stand, tilt the cradle back then grasp
the Mixer firmly with hand and press
the Release Button on the bottom of the
cradle.
Caution: The Mixer should be unplugged
from the electrical outlet and in the "Off"
or "0" position when attaching to — or removing from the Stand.
r l
aising and oWering The
Press the head lock button, located on the
neck of the Stand Mixer. While the button
is depressed, hold the handle and ease the
head of the Stand Mixer back, release the
button, the Stand Mixer head will lock
into this position. To lower the mixing
head, press the head lock button. While
the button is depressed, hold the handle
and ease the head of the stand mixer
down. A "click" sound will indicate when
the mixing head is securely in position. Be
sure the mixer head is securely in position
before using.
Make sure the Hand Mixer is firmly attached to the base and the head is
firmly down and locked into place before picking up or moving mixer.
FPSBHS0404, 0403, 0302, 0301_12ESM1.indd 11-12
s M
Tand ixer
M h
ixing ead
10
e B
jecTing eaTers
Make sure the speed control is in the "0" position and unplugged from an
electrical outlet. Scrape off any excess batter with a rubber spatula. Grasp
the stems of the beaters with your hand and press the beater eject button.
B p
oWl laceMenT
With Hand Mixer firmly attached, tip back head. Place bowl on the
mixer turntable and rotate clockwise to lock bowl into position. To
unlock hold turntable and rotate bowl counter-clockwise.
c & c
aring leaning of
1. Before cleaning any part of the mixer, set the position selector to
the "0" position, then unplug the cord from the outlet and eject
the beaters. Make sure to wash and dry all non-electrical parts
thoroughly before using them again.
2. T he mixer and cord are be cleaned with a damp cloth but the final
cleaning must be with a dry cloth. Do not immerse mixer or cord
in liquids.
3. To remove stubborn spots, wipe surfaces with a piece of cloth,
slightly dampened, in soapy water or a mild, non-abrasive cleaner.
4. The attachments and bowl may be washed in hot, soapy water or
in a dishwasher.
5. Do not use any abrasive cleaner or material to clean any part of
the hand mixer, as it can harm the body of the product.
s
Torage
Store the hand mixer on its heel rest in a clean, dry location such as
a cabinet or shelf. Store beaters in a drawer or assembled on the stand,
or assemble on stand and store together.
M
ainTenance
Other than the recommended cleaning, no further user maintenance
should be necessary. If for any reason your hand mixer should require
repairs, do not try to fix it yourself. Send it to the nearest Authorized
Sunbeam Appliance Service Center.
11
y M
oUr ixer
5/25/12 8:18 PM