Klein Tools TONEcube Manual De Instrucciones página 3

Ocultar thumbs Ver también para TONEcube:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PROBEplus GENERAL SPECIFICATIONS
Dimensions:
6.0 oz. (170 grams) with battery
Weight:
Operating Temperature:
Storage Temperature:
10% to 90%, non-condensing
Humidity:
10,000 feet (3,000 meters) maximum
Altitude:
Life: 9V alkaline battery - typical
Battery
Standby:
Active:
To ensure safe operation and service of the instruments, follow these
instructions. Failure to observe these warnings can result in severe injury
or death.
• The TONEcube and PROBEplus are designed for use on extra low
voltage cabling systems (less than 60 volts).
• The maximum voltage across the test leads of the TONEcube is 60
volts in status (STAT) mode and 20 volts in the continuity (CONT)
mode. Connecting the TONEcube to live mains AC power may
damage it and pose a safety hazard for the user.
• These instruments are not designed to be used outdoors.
• Do not use instruments if they are wet, as this could pose a shock
hazard.
• Turn off instruments before attempting to replace batteries, and
disconnect all test leads from the TONEcube.
• Do not use instruments if they are damaged in any way.
WARNINGS:
Always wear approved eye protection.
Do NOT use on energized circuits.
9.85" x 2.00" x 1.14" (25.02 x 5.08 x 2.90 cm)
0°C / 32°F to 50°C / 122°F
-20°C / -4°F to 60°C / 140°F
4 years
25 hours
WARNINGS
3
Tabla de contenido
loading

Este manual también es adecuado para:

ProbeplusVdv500-051Vdv500-060

Tabla de contenido