Important Remarks - DIMOEL moov-b400 Manual De Instrucciones

IMPORTANT REMARKS

The manufacturer has the right to modify the product without
previous notice; it also declines any responsibility to damage
or injury to people or things caused by improper use or wrong
installation.
PLEASE READ THIS INSTRUCTION MANUAL VERY
CAREFULLY BEFORE INSTALLING AND PROGRAMMING
YOUR CONTROL UNIT.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE WITH
THE EUROPEAN REGULATIONS IN FORCE:
EN 13241-1:2016 (Industrial, commercial, garage doors and gates.
Product standard, performance characteristics
EN 12453:2017 (Safe use of automated locking devices,
requirements)
• The installer must provide for a device (es. Magnetotermical
switch) ensuring the omnipolar sectioning of the equipment from the
power supply.
The standards require a separation of the contacts of at least 3 mm
in each pole (EN 60335-1).
• The plastic case has an IP55 insulation; to connect flexible or rigid
pipes, use pipefittings having the same insulation level.
• Also the automation upstream electric system shall comply with the
laws and rules in force and be carried out workmanlike. The
manufacturer declines any responsibility if the installation don't
comply with the regulations in force.
• Using the motor in dusty environments and saline or explosive
atmospheres is forbidden.
2