Part Names - Korg tinyPIANO Manual De Usuario

Part Names

Power LED
VOLUME
Power button
knob
SONG
SOUND
button button
Please note that if the product is exposed to direct sunlight or
indoor lights for extended hours, the color of the exterior or
keyboard may change.
Internal Setup and Connections
1. Inserting the batteries
After using a Phillips screwdriver to remove the battery case
cover holder on the back, remove the battery case cover. Insert
the six included AA batteries (or separately sold alkaline batter-
ies or nickel-metal hydride batteries) in the correct orientation,
according to the illustration.
Do not mix new batteries with old or different types of bat-
teries.
Make sure that the separately sold AC adapter is not con-
nected while the batteries are being inserted or replaced.
Remove screw with
Phillips screwdriver.
Battery case
cover holder
Replacing batteries
A flashing power LED indicates that the batteries are nearly ex-
hausted. Replace the batteries with new ones.
If battery power decreases, sounds from the tinyPIANO
may become distorted.
Remove old batteries immediately. Otherwise, battery leak-
age may occur, resulting in a malfunction. If you don't
think that you'll be using the unit for a long period of time,
you should remove the batteries.
The tinyPIANO can also be used with
the separately sold AC adapter connected
to the DC9V jack.
Pass the AC adapter cord through the
cord hook so that the plug won't be
removed from the jack accidentally.
When you unhook the cord, don't pull
the cord with force.
2. Turning the tinyPIANO on
Press the power button located on the front right of the top
panel to turn on the power.
The power LED will light up.
To turn the power off, press the power button again.
The power LED and the power to the unit will turn off.
The tinyPIANO is equipped with an auto power off function.
With this function, the tinyPIANO is automatically turned off
when 30 minutes have passed without a key being pressed on
the keyboard. In addition, the tinyPIANO will not be automati-
cally turned off during playback of a song.
The auto power off function cannot be disabled.
4
DC9V jack Headphone jack
Cord hook
Battery case
cover
When you replace the battery
cover, be sure to push this part
firmly until it clicks and locks.
Battery
case cover
DC
plug
AC adapter
To AC
outlet
3. Adjust the volume
Rotate the VOLUME knob clockwise to raise the volume
level. Rotate it counter-clockwise to lower the level.
The VOLUME knob controls the output level of the built-in
speakers and the headphones jacks.
Using headphones
When you plug in the headphones, the built-in speakers will be
muted. This is useful when you want to play the keyboard in
the evening without bothering your family or neighbors.
Insert the stereo headphone plug into the headphone jack on
the rear panel. The sound will be monaural.
If your headphones feature a standard-to-mini adapter plug, be
sure to hold the adapter plug when you connect or disconnect
the headphones.
To protect your hearing, do not listen to loud, high-volume
sounds for long periods of time through the headphones.
Connecting audio components
You can use the headphone jack as a line-out to connect the ti-
nyPIANO to powered speakers or other audio components.
Connect the device using commercially available cables that
are (stereo mini plug for the connection to the tinyPIANO) ap-
propriate for the device you're connecting. The sound will be
monaural.
Before connecting any audio components, make sure that
you turn off the power to the unit as well as the audio com-
ponents. Otherwise, malfunctions or damage to the unit or
components may occur.
Playing Different Preset Sounds
(Play Mode)
You can select a sound for your performance from 25 different pre-
set sounds. Each sound already has a suitable effect applied.
When you turn the unit on or stop song playback, the unit will en-
ter Play mode.
While pressing and holding down the SOUND button (located
on the top panel), press one of the keys ranging from C4 to C6.
The sound will change depending on which key you press. (See
"Sound and Song List" on back cover; page 16.)
When you turn the unit on, the default sound (Toy Piano) will be
selected.
Listening to Songs (Song Mode)
The tinyPIANO features 50 songs.
Each song uses an appropriate sound and effect.
Press the SONG button, which is located on the front right of the
top panel, to begin playback of the songs, starting with the first
one, after a few seconds. (See "Sound and Song List" on back
cover; page 16.)
To stop playback, press the SONG button.
Listening to a specific song
1. While pressing and holding down the SONG button, press
one of the keys ranging from C4 to C6.
To select songs 26 through 50, press and hold down the
SONG button while pressing one of the keys ranging from
C4 to C6 twice.
Playback starts from the selected song, then continues and
repeats all of the songs in ascending order until you stop play-
back.
2. Press the SONG button again to stop playback.
A different song can be selected by pressing and holding down
the SONG button and pressing a key on the keyboard. In addition,
playback can be stopped by simultaneously pressing and holding
down the SOUND and SONG button. (See "Listening to a Song
using a Different Sound (User Auto perform Mode)" on the next
page.)