Safety Regulations; General Characteristics - Corghi EXACT BlackTech X Manual De Uso

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte

SAFETY rEGULATIoNS

The equipment is intended for professional
use only.
WARNING
Only one operator may work on the equipment
at a time.
WARNING
Failure to comply with the instructions and
danger warnings may cause serious injury to
operators and to others in the vicinity.
Before starting up the equipment, always ensure
you have read and understood all the danger/
warning signs in this manual.
Only qualified, authorised operators are capable
of using this equipment correctly. In order to be
classified as skilled, operators must be capable of
understanding the written instructions provided
by the producer, and be trained and familiar with
the safety rules and labour regulations.
Operators must not use the equipment under
the influence of alcohol or drugs which may affect
their capacity. In all cases, it is essential to:
- Be able to read and understand all the infor-
mation in this manual.
- Have a thorough knowledge of the capabilities
and features of this machine.
- Keep unauthorised persons well clear of the
area of operations.
- Make sure that the equipment has been
installed in compliance with all the relevant
legislation and standards.
- Make sure that all system operators are suit-
ably trained, that they are capable of using
the equipment correctly and safely and that
they are adequately supervised during their
work.
- Do not touch power lines or electrical equipment
without first making sure that the power supply
has been disconnected.
- Read this manual carefully and learn how to use the
machine correctly and safely.
- Always keep this operator's manual in a place
where it can be readily consulted and to consult
it whenever appropriate.
WARNING
Do not remove or deface the Attention, Warning
or Instruction decals. Replace any missing or
46
illegible decals. Missing or damaged decals can
be obtained at your nearest Corghi dealer.
- when using and carrying out maintenance on
the equipment, observe the standardised
industrial accident prevention regulations.
- Unauthorised alterations or changes to the
equipment relieve the constructor of all liabil-
ity for any consequent damage or accidents. In
particular, tampering with or removing safety
devices constitutes a breach of Safety at work
Regulations.
During work and maintenance operations, al-
ways tie up long hair and do not wear loose or
floppy clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
Infrared Radiation!
Avoid prolonged close-up exposure. Do not
observe directly with optical instruments.
- Angle reading with infrared CCD cameras.
- 0.01 degree data display.
- Databank on Hard disk or CD-ROM.
- User databank and jobs archive.
- Guide to vehicle adjustment with stationary
or animated images.
- SVGA colour monitor (resolution 800x600 pixels,
256 colours). 14" and 17" CRT, 15" LCD.
- Colour INJKET or B/w LASER printer.
- Professional alphanumeric keypad.
- Exceptional operating freedom, the user can
switch between adjustments at will.
- Steering measurement in automatic or directly
from targets.
- Data displayed in degrees, grades, millimetres
and inches.
- Graphic comparison between the data read
and the databank values.
- Vehicle chassis diagnostics.
- Self-centring clamp, 10" to 19", with built-in
spoiler adapter.
- Remote control to work at a distance.
http://www.eichstaedt-elektronik.de
WARNING
WARNING
GENErAL
CHArACTErISTICS
Operator's manual EXACT BlackTech X