Front Axle Measurement And Adjustment Window - SICE A 92 Manual De Instrucciones

• Bar
• Psi
Weight

• Kilograms
• Pounds
Mileage/Kilometres on the clock

• Kilometres
• Miles
 Alignment procedure
Adjustment with car lifted

• On;
• Off;
- F5 enables/disables execution of the "Jack & Hold" procedure
- F6 switches between display of the camber, Track Difference and Setback adjustment boxes
- F7 displays the animation window
- F8 displays a window with a list of working windows. Used for skipping quickly between
windows.
- F10 returns to the starting screen.
Notes
• The numeric values are colour-coded as follows:
- Red background: value outside the permitted tolerance range;
- Green Background: value within the permitted tolerance range;
- Blue background: value with no associated reference tolerance range;
• Animated icons that respond to the progress in the adjustment procedure appear beside the
adjustment value display fields.
The icons assume the following forms:
- Large icon with pointer.
Provides an approximate indication of the status of the angle and the wheel position (shown on
an arc with different coloured zones: red zones mean value outside tolerance range, central
green zone mean acceptable value);
The large icon with pointer ceases to be animated and the coloured arc disappears when
there are no tolerance values for the vehicle selected.
- Small icon with coloured scale.
Provides a high-precision reading, appropriate to the tolerance value, of the variations in
the adjustment value in relation to the tolerance value. Displayed instead of the large icon
with pointer when this icon gives a reading in the green zone. The reading is provided on a
graduated bar. When the wheel value is near the limits of the tolerance range, the bar
background is white. It switches to green when the wheel adjustment value is at +/- 4
grades from the nominal setting value.
• At the bottom of the window, over the F5 and F6 keys, there is the status of the levelling
gauges of the targets applied on the axle being measured.

FRONT AXLE MEASUREMENT AND ADJUSTMENT WINDOW

Displays the measured values for the vehicle front axle and the adjustment reference
tolerances.
The values are continually updated to guide the operator performing the adjustment.
The following keys are active in this window:
- F1 displays the on-line "Help"
- F2 goes back to the previous window
78