Mixing The Fuel; Filling The Fuel Tank - Homelite UT10548 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MIXING THE FUEL

This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubricant.
Pre-mix unleaded gasoline and 2-cycle engine
lubricant in a clean container approved for gaso-
line. DO NOT mix quantities larger than usable in
a 30-day period.
Recommended fuel: This engine is certified to
operate on unleaded gasoline intended for auto-
motive use.
NOTE: We recommend you use Homelite premium
2-cycle lubricant or an equivalent high-quality
synthetic 2-cycle lubricant in this product. Mix at
2.6 oz. per gallon (US).
Do not use automotive lubricant or 2-cycle outboard
lubricant.
HIGH QUALITY 2-CYCLE ENGINE LUBRICANT
GASOLINE
1.0 gal. (US) (3.8 liter)
OPERATION

FILLING THE FUEL TANK

See Figure 2.
 Clean the surface around the fuel cap to prevent
 Loosen the fuel cap slowly, by turning counter-
 Carefully pour the fuel mixture into the tank.
 Prior to replacing the fuel cap, clean and inspect the
 Immediately replace the fuel cap and hand
 Move at least 30 ft. away from refueling area
NOTE: It is normal for the engine to emit smoke
during and after the first use.
LUBRICANT
2.6 oz. (76 ml)
Page 13 — English
contamination.
clockwise.
Avoid spillage.
gasket.
tighten, by turning clockwise. Wipe up any fuel
spillage.
before starting the product.
Fig. 2
Tabla de contenido
loading

Tabla de contenido