Ecg Measurement - Gima 32597 Manual Del Usuario

4) Select auscultation mode (heart sound, lung sound and heart&lung
combination sound.) and the auscultation volume.
Attention:
 Please check the device before using,and confirm that it can work normally.
 When monitoring the auscultation function, keep the device in tranquil
environment.
 If only to auscultate the sound,medical conductive paste is not needed,
you can measure directly through the stethoscope probe which connects
with the body thoroughly and stably.
 Acute sport will affect the measure result.

5.1.2 ECG Measurement

1) Let the patient keep calm.
2) Daub some medical conductive paste to the surface of the three electrodes
well-proportioned.
3) Press long to turn on the device,and it will enter the ECG monitor
interface (do not connect the oximeter probe to the device), see Fig. 5-1.
4) Hold the device and stick to the chest of patient. All the three electrodes
should stick to the skin upon heart. It can display the real-time ECG. (User can
adjust the wave scale according to the systerm settings,see chapter 5.2).
5) When monitoring,short press to halt the wave. Then operators observe
the wave carefully,short press
6) Press long to turn off the device after measuring.
Fig. 5-1 ECG monitor interface
Attention:
 Please check the device before using, and confirm that it can work normally.
 Let the patient use the device in quiet environment,and not speak during
monitoring.
 The device should be in a proper position, or else it may result in inaccurate
measure.
ENGLISH
again to continue monitor after observing.
56