Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using the Battery P a c k
Note: It is important to charge the battery fully
before the initial use of the phone.
The phone comes with a rechargeable battery.
Keep the battery charged while not in use in order
to maximize talk and standby time when using the
phone.
Installing the Battery
To install the battery, insert the bottom of the
battery into the opening on the back of the phone.
Then push the battery down until the latch clicks.
Removing the Battery
Turn the power off. Lift the release latch to detach
the battery.
slot
14
VX6000
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen.
Fully Charged
When the battery charge level becomes low, the low
battery sensor alerts you in three ways: sounding an
audible tone, blinking the battery icon, and displaying
LOW BATTERY WARNING! If the battery charge level
becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
Using the Desktop Charger
The desktop charger has a slot for recharging batteries
that accommodates the phone and battery for
charging.
release
1. Plug the charger into a wall outlet. The phone must
latch
2. Insert the phone with an installed battery or the
Warning! Use only the desktop charger
provided with the phone. Using any charger
other than the one included with the VX6000
may damage your phone or battery.
be charged from a 120 VAC power source.
battery by itself into the slot of the charger.The red
light indicates the battery is charging and the green
light indicates the battery is fully charged.
The charge time varies depending upon the
battery level and the maximum charge time for a
fully discharged battery is 3 hours.
VX6000
Fully Discharged
15
Capítulos
Tabla de contenido
