Loading and using the washer.
Sorting Wash Loads
Sort laundry into loads that can be washed together.
Colors
Whites
Lights
Darks
I
Combine large and small items in a load. Load large items first. Large items should not be more than half the total
wash load.
I
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
Loading the Washer
Wash drum may be fully loaded with loosely
added items. Do not wash fabrics containing
flammable materials (waxes, cleaning fluids, etc.).
Care and Cleaning
Exterior: Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
Interior: Dry around the washer door opening, flexible gasket and door glass. These areas should
always be clean to ensure a water tight seal.
Moving and Storage: Ask the service technician to remove water from drain pump and hoses.
Do not store the washer where it will be exposed to the weather. When moving the washer, the
tub should be kept stationary by using the brackets and bolts removed during installation. See
Installation Instructions in this book. If these parts are not available, they can be ordered by
visiting our Website at ge.com or by calling 800.GE.CARES.
Long Vacations: Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
8
Always follow fabric manufacturer's care label when laundering.
Soil
Fabric
Heavy
Delicates
Normal
Easy Care
Light
Sturdy Cottons
Lint
Lint Producers
Lint Collectors
To add items after washer has started, press the
PAUSE CANCEL button and wait until there is no
longer any water on the door window. Do not
force open the locked door; open gently. Add
items, close the door and press the START button.