Clear Dust (Clean Dust Mesh Filter); Cleaning And Maintenance - IRIS IC-FDC1U Manual De Usuario

CLEAR DUST (CLEAN DUST MESH FILTER)

Please clear and clean regularly to maintain higher suction capabilities.
1. Remove the dust cup.
Press the buttons on either side of the dust cup to remove it.
2. Remove the mesh filter in water.
To avoid splattering of dust, please remove the mesh filter from the dust
cup in water.
3. Clean the mesh filter.
Remove the dust stuck to the filter, then rinse the filter with running water.
Soak the dust cup in water with a diluted cleaning agent for
several minutes for easy removal of accumulated dust.
4. Dry.
Place the dust cup and filter in a well ventilated area until fully dry.
*When cleaning the mesh filter set, please do not use washing machine
or other heated device as this may cause product deformation.
5. Reassemble the mesh filter.
Place the mesh filter set back into the dust cup.
*Pay attention to the direction.
Notice:
Please reassemble correctly to avoid damaging the product.
6. Reattach the dust cup.
Place the mesh filter in the dust cup, and then place the dust cup back
into the vacuum body until you hear it click into place.
Please verify that both buttons are clicked firmly in place.
Dust cup
Button
Dust cup
Mesh filter set
Dust cup
7

CLEANING AND MAINTENANCE

Warning:
Cleaning and maintenance must be done after removing the battery.
Notice:
Button
Please do not splash water on the vacuum body as this could cause damage.
Use a diluted neutral cleaning agent.
Use of strong cleaning agents such as amyl acetic ester, alcohol, oil, etc. can cause fading, deformation or breakdown.
Vacuum Body:
Fully wring out a rag and use it to wipe down the body and any
remaining cleaner.
Battery:
Please use a dry rag on the terminal parts of the battery to clear
out accumulated dirt which can disrupt product use.
• Incorrect assembly of the mesh filter and dust cup can
allow dust and dirt inside which can damage the terminals.
Dust Indicator:
Remove the dust cup and clean both sides of the sensors with a
cotton swab.
• Please clean regularly to avoid dust buildup, causing sensor
to function poorly.
Collection Head:
• Clean hair, string and other small objects from the dust
intake port using tweezers to prevent dust buildup and
decreased suction. Please clean it regularly.
• Please clean dirt on the agitator with a brush.
• Please clean bedding sensors with a cotton swab.
• Clean regularly to prevent dust buildup causing sensors to
Clicking
function poorly.
sound
Dust indicator
Agitator
Bedding sensor
8
Terminal