Troubleshooting; Specifications - IRIS IC-FDC1U Manual De Usuario

Ocultar thumbs Ver también para IC-FDC1U:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Before making repairs, please read the following content carefully to fix common problems.
STATUS
Battery has no charge.
Battery not properly assembled.
Not powering on
Device is connected to the charger.
Still in safety lock mode.
Battery power is low.
Low suction
Filter is clogged.
Dust cup is clogged.
Charger is not plugged into the power
outlet.
Charger plug isn't fully plugged into the
charging port.
Won't charge
Battery not assembled correctly.
Battery is dirty.
Stops during operation
Charging time varies based on conditions and lengths of use.
Charging may take up to 5 hours
Battery level light is ON while
running
If charged for more than 5 hours and indicator light is still on, please contact
IRIS USA, Inc. customer service.
Device was charged in a high
Decreased running time on full
temperature area.
battery
Battery has lost ability to hold charge.
Vacuum and charger heat up while
Temperature rise is caused by the current. This is normal.
charging
Vacuum body heats up while running Temperature rise is caused by the battery heating up from use. This is normal.
Not running, but dust sensor is on
Sensor is coated in dust.
Running, but dust sensor is off
Significantly lower suction.
Problems that could not be resolved.
Please contact the dealer of purchase or IRIS USA, Inc. customer service.
Warning:
Do not disassemble, repair or modify the product yourself.
POSSIBLE CAUSE
REMEDY
Please charge battery.
Please make sure battery clicks into
place.
Please unplug charger.
Please hold menu button for 3 seconds
to unlock.
Please charge battery.
Please clean or replace.
Please remove dust.
Please make sure charger is plugged
in.
Please make sure charger is firmly in
place.
Please make sure battery clicks into
place.
Please remove battery and clean
terminals with a rag.
Please charge in recommended
temperature conditions.
Please replace the battery.
Please clean sensor (P8).
Please clean or replace filter, and
empty contents from the dust cup.
11

SPECIFICATIONS

Before making repairs, please read the following content carefully to fix common problems.
ITEMS INCLUDE
Vacuum, charger, battery (1 PC)
OPERATING: 10.0x17.7x6.2in 254x449x158mm
Product Size
STORED: 10.0x6.0x18.0in 254x153x458mm
Product Weight
About 4.6lbs/2.1kg (body/battery)
Working Temperature Range
32°F/0°C ~ 104°F/40°C
Running Time
About 20 minutes (full power/new battery/68°F/20°C)
Charger Length
70.8in / 1.8m
Charger Model Number
YLS0241A-T200120
Charger Manufacturer
Dongguan Yinli Electronics Co., Ltd.
Battery
Ni-MH battery (CBN-1420WP or CBN-1420B)
Battery Capacity
SC2,000mAh
Battery Lifespan
About 300 times (full charges)
Rated Voltage
DC14.4V
Input: AC100-240V 50/60Hz 0.8 A
Charger Power
Output: DC20V 1.2 A
Charging Time
About 3.5 hours
*Specifications are subject to change without prior notice.
12
Tabla de contenido
loading

Tabla de contenido