Key To Symbols; Batter Y Safety; B A Tter Y Handling - Husqvarna BLi100 Manual De Instrucciones

K ey to symbols
T ranslation of the original Swedish operating instruction.
WARNING! Incorrect or careless use of
a battery can turn it into a dangerous
tool that can cause serious or even
fatal injury. It is extremely important
that you read and understand the
contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
This product is in accordance with
applicable EC directives.
Symbols on the product or its
packaging indicate that this product
cannot be handled as domestic waste.
This product must be deposited at an
appropriate recycling facility.
Do not submerge the battery in water.
Other symbols/decals on the mac hine
refer to special certification
requirements for certain markets.
The type plate sho wing
production number. yyyy is
the production year, ww is
the productionweek and
xxxxx is the serialnumber.

Batter y safety

This section descr ibes the battery and battery charger
safety for your battery product.
(1) to (8) refer to the figure on page 2.
W ARNING! Read all safety warnings and
!
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
IMPOR TANT! Save all warnings and instructions for
future reference.
Only use Husqvarna original batteries for Husqvarna
products and only charge them in original QC330 or QC
500 battery charger from Husqvarna. The batteries are
software encrypted.
Batter y
The rechargeab le Husqvarna batteries, BLi, are
exclusively used as a power supply for the relevant
Husqvarna cordless appliances. To avoid injury, the
battery must not be used as a power source for other
devices. (1)
• Do not dismantle, open or shred batteries.

B A TTER Y HANDLING

Li-ion
yyyywwxxxxx
• Do not expose cells or batteries to heat or fire. Avoid
storage in direct sunlight.
• Regulary check that the battery charger and the
battery are intact. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
•
Never use battery pack or appliance that is faulty,
modified or damaged.
• Never attempt to modify or repair the battery pack.
Entrust all repairs to your authorized dealer only
• Do not remove a battery from its original packaging
until required for use.
• Do not subject batteries to mechanical shock.
• In the event of leaking, do not allow the liquid to come
in contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts
of water and seek medical advice.
• Observe the plus (+) and minus (-) marks on the
battery and equipment and ensure correct use.
• Keep batteries out of the reach of children.
• Keep battery clean and dry.
• Wipe the battery terminals with a clean dry cloth if
they become dirty.
• Batteries need to be charged before use. Always use
Husqvarna QC330 or QC500 battery charger.
• Do not leave a battery on prolonged charge when not
in use.
• Remove the battery from the equipment when not in
use.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
Operation
The display shows the battery capacity and if there are
any problems with the battery. The battery capacity is
displayed for 5 seconds after the machine is switched off
or the battery indicator button is pressed. (8) The warning
symbol on the battery is lit when an error has occurred.
See fault codes. (6)
LED lights
All LEDs are lit
LED 1, LED 2, LED 3 are
lit.
LED 1, LED 2 are lit.
LED 1 is lit.
LED 1 flashes.
Batter y status
Fully charged (75-100%).
The battery is 50%-75%
charged.
The battery is 25%-50%
charged.
The battery is 0%-25%
charged.
The battery is empty.
Charge the battery.
English
–
3