Data And Fax Calls - Nokia 2855 Manual Del Usuario

S e t t i n g s

Data and fax calls

Receive data or fax calls
Data/fax calls.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
See "Network services," p. 5, for more information.
For better performance during data calls, place the phone on a stationary surface.
Do not move the phone by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
www.nokiausa.com.
1. In the standby mode, select
Incoming data/fax call
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2. Select Data calls only
3. When you are finished receiving the fax or data call, repeat steps 1 and 2,
and select Normal.
View data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select
display > Graphic or Off.
Call summary
Your phone can display the time spent on a call when you hang up. In the standby
mode, select Menu
Show call time on display
Your phone can display the call time during the phone call. In the standby mode,
select Menu > Settings
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID. In the
standby mode, select
Off. See "Customize a profile," p. 53 for more information on selecting a ringing tone.
60
Menu >
and view the following options:
or Fax calls only.
Menu > Settings
> Settings > Call >
> Call > Show call time on display
Menu > Settings >
Settings > Call > Data/fax calls
> Call > Data/fax calls
Call summary > On
>
Call > Ringing tone for no caller ID
>
> Data rate
or Off.
On or Off.
> On or