Operation; Blender Foot - Bosch ErgoMixx MSM67190 Instrucciones De Uso

Operation

Warning!
The bottom of the receptacle which you use
must not have any bumps or recesses.
Before using the appliance for the first

time, clean all parts of it.

Blender foot

The blender foot is suitable for blending
mayonnaise, sauces, mixed drinks, baby
food, cooked fruit and vegetables.
For puréeing soups.
It is recommended to use the supplied
blender jug. However, other suitable
receptacles can also be used.
Fig.

Completely unwind the power cord.

Place the blender foot on the base unit

and lock into position.
Insert the mains plug.

Place food in the blender jug or another

tall receptacle.
The appliance works better if there is
some liquid in the ingredients.
Set the required speed with the speed

control (cáÖK

It is recommended to use a low speed
setting for liquids, hot food and for mixing
(e.g. muesli in yoghurt).
The high speed settings are recommen-
ded for the processing of more solid
foods.
Firmly hold the hand blender and jug.

Switch on the hand blender by pressing

the required On button.
When switching on the hand blender,
hold it at a slight angle to prevent it from
"sticking" to the bottom of the blender jug.
The hand blender remains switched on
as long as the On button is pressed.
To prevent the ingredients from
splashing, do not press the On button
until the blender foot has been immersed
in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.
Release the On button after processing.

After using the appliance:
Remove mains plug.

Press the release buttons and remove

the blender foot from the base unit.
Robert Bosch Hausgeräte GmbH
-5).
Whisk
The whisk is suitable for whipping cream,
beating egg whites and milk froth (from hot
(max. 70 °C) and cold milk (max. 8 °C)) as
well as for preparing sauces and desserts.
Risk of scalding!
When processing hot milk, use a tall, narrow
receptacle for blending. Hot milk may splash
and scald you.
Fig.

Put ingredients into the blender jug.

Place the gear attachment on the base

unit and lock into position.
Insert the whisk into the gear attachment

and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig.=  -3).
Insert the mains plug.

Set required speed using the speed

control (recommendation: high speed).
Grip base unit and blender jug and press

required On button.
Release the On button after processing.

After using the appliance:
Remove mains plug.

Press the release buttons and remove

the base unit from the gear attachment.
Remove the whisk from the gear

attachment.
Éå
13