General Power Tool Safety Warnings - Makita DHP441 Manual De Instrucciones

Ocultar thumbs Ver también para DHP441:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
ENGLISH (Original instructions)
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star marking
5.
Switch trigger
6.
Lamp
7.
Reversing switch lever
8.
Speed change lever
9.
Action mode changing ring
10. Adjusting ring
11. Arrow
SPECIFICATIONS
Capacities
No load speed (min
Blows per minute (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
Explanation of general view
12. Graduations
13. Steel band
14. Grip base
15. Protrusion
16. Side grip
17. Groove
18. Sleeve
19. Bit holder
20. Bit
21. Depth rod
22. Clamp screw
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (3)
-1
)
Medium (2)
Low (1)
High (3)
-1
)
Medium (2)
Low (1)
Net weight
DHP441
14 mm
13 mm
50 mm
6 mm x 75 mm
250 mm
D.C. 14.4 V
CORDLESS HAMMER DRIVER
ENE039-1
DRILL SAFETY WARNINGS
1. Wear ear protectors with impact drilling. Exposure
to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
GEA010-1
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
4. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
23. Screw
24. Hook
25. Limit mark
26. Rear cover
27. Screws
28. Arm
29. Spring
30. Recessed part
31. Carbon brush cap
32. Hole
6 mm
0 - 1,700
0 - 600
0 - 300
0 - 25,500
0 - 9,000
0 - 4,500
2.4 kg
DHP451
16 mm
13 mm
65 mm
10 mm x 89 mm
250 mm
2.5 kg
D.C. 18 V
GEB056-4
5
Tabla de contenido
loading

Este manual también es adecuado para:

Dhp451

Tabla de contenido