Power Indicator ; Rear Panel - Fender Rumble 15 Manual De Instrucciones

Thanks for buying a Fender® Rumble™ series bass amplifier. Fender
bass amplifiers are legendary for providing thick, natural and bal-
anced tone that sits fat in your live or studio mix. Rumble amps are
designed by and for bass players, and we take great pride in putting
full-featured, easy-to-operate amps of the highest quality in the
hands of working and aspiring musicians everywhere.
The Rumble family can take you from home rehearsal all the way
to the 1,000-seat concert and beyond. Wherever your musical path
takes you, Rumble bass amps help get you there!
INPUT VOLUME BASS MID
EQUALIZATION
A. INPUT — Plug your bass in here.
B. VOLUME — Controls the loudness of the amplifier.

Rumble amps are equipped with Fender's Delta-Comp™ lim-
iter. Setting the VOLUME higher or playing more aggressively
will result in more compression and sustain!
C. OVERDRIVE — Press this button to select the OVERDRIVE
circuit which provides pre-amp distortion tones. The red LED
illuminates when OVERDRIVE is on. Increase the VOLUME level
to produce more OVERDRIVE distortion and sustain.
D. CONTOUR — Press this button in to select the CONTOUR circuit
which provides a mid-frequency cut that offers a fat, pleasing
tone useful for slap style playing, low-volume practice, or in
combination with OVERDRIVE.
E. EQUALIZATION — Use these knobs to adjust overall tone and
to compensate for room acoustics. Remember, what sounds
harsh in a garage with a cement floor may have just the right
edge in a bedroom with carpet.
F. AUX IN — Plug your media player in here for accompaniment.
The amplifier controls do not affect this input. Adjust the vol-
MODEL:
POWER REQUIREMENT:
INPUT IMPEDANCES:
PRE-AMP SENSITIVITY:
(Full power @ 100Hz, volume at max, tone controls flat)
POWER AMP OUTPUT:
TONE CONTROLS:
CONTOUR FILTER:
HEADPHONE OUTPUT:
SPEAKERS:
Specifications are subject to change without notice. Visit www.fender.com for additional product information.
8
TREBLE AUX IN PHONES
Specifications
Rumble 15
40W Max / 20W Typical
1MΩ (Input) / 10kΩ (Aux In) 60mVrms
15W into 8Ω @ <0.3% THD, 100Hz
BASS: ±15dB @ 60Hz
MID: ±15dB @ 630Hz
TREBLE: ±15dB @ 6kHz
N/A
110mW into 32Ω/Channel
One 8Ω, 8", Special Design
/
Please visit the individual product page at:
series/rumble
for full warranty details and instructions on how to
get your amplifier serviced under warranty in U.S.A. and Canada;
/ / /
see your Fender distributor for warranty details in other countries.
PRODUCT REGISTRATION — Please visit:
INPUT VOLUME BASS MID
OVERDRIVE CONTOUR
EQUALIZATION
ume and tone of the auxiliary input at the source by using the
controls on your media player.
G. PHONES — Plug your stereo headphones (32 ohms minimum
impedance) in here. Speaker output from the amplifier is auto-
matically muted when the PHONES jack is in use.
H. POWER INDICATOR — Illuminates when power is switched on
to the unit.
I. POWER SWITCH — Press to the "ON" position to
switch power on to the unit. Press to the "OFF"
position to switch power off to the unit.
J. IEC POWER CORD SOCKET — Connect the
included power cord to a grounded A/C electri-
cal outlet in accordance with the voltage and
frequency ratings specified on the rear panel of
your amplifier.

Refer to the back cover page of this manual for a block dia-
gram of the Rumble amplifier circuitry.
Rumble 25
70W Max / 35W Typical
1MΩ (Input) / 25kΩ (Aux In) 60mVrms
25W into 8Ω @ <0.3% THD, 100Hz
BASS: ±15dB @ 60Hz
MID: ±15dB @ 630Hz
TREBLE: ±15dB @ 6kHz
–18dB @ 630Hz
140mW into 32Ω/Channel
One 8Ω, 8", Special Design
www.fender.com/
www.fender.com/product-registration
TREBLE AUX IN PHONES

Rear Panel

ON
OFF
POWER
ON
OFF
POWER
INPUT POW
V
____W
INPUT POWER
V Hz
____W