3
3
Discard the water in the drain cup.
4
4
Pour out the water from the appliance in
the direction of the arrow as shown.
●
Emptying the water in a direction other than that
indicated by the arrow may get the switch wet,
which may cause a malfunction.
●
To prevent risk of burns or scalding when
discarding the water, hold the bottom of the
appliance.
5
5
Wipe off any water from the appliance.
●
Do not wind the cord around the appliance.
-
Doing so may damage the cord.
●
If the water supply cup is to be placed upside down on the appliance for
storage, first wipe off any water from the cup.
-
Failure to do so may get the switch wet and result in malfunction.
USER-MAINTENANCE INSTRUCTIONS
Cleaning
Do not wash or soak the appliance in water.
Cleaning around the water inlet and water level
●
Clean once a month.
●
To remove and prevent water scale deposits, let the appliance cool for at least
10 minutes after use and then clean according to the following steps.
1
1
Open the water supply cover and add water using the water
supply cup.
●
Add water until the "full" mark on the appliance.
2
2
Close the water supply cover and shake the
appliance horizontally 3-4 times.
●
Shake the appliance gently without tilting it.
3
3
Open the water supply cover and pour out
the water from the appliance in the
direction of the arrow as shown.
●
To prevent risk of burns or scalding when
discarding the water, hold the bottom of the
appliance.
●
Repeat the above steps -3 times for effective
cleaning.
4
4
Wipe off any water from the appliance.
●
Even if there are water scale deposits near the water inlet or water level, the
discharged steam is not affected.
EH2426_USA.indb
9
9
2011/03/31
13:20:07