After Use - Panasonic EH2426 Instrucciones De Operación

How to use the hot steam
Move your face slightly to the left and right so that the steam spreads evenly.
Using the steam on your nose is effective on the T-zone.
1
1
Keep your face at least 20 cm (8") away
from the edge of the nozzle.
When using the appliance for the first time or it is
difficult to find the appropriate distance, use the
attached Distance guide to confirm the distance
between the area you want to expose to the steam
and the nozzle edge.
2
2
Position the steam outlet towards your
face slightly above your chin.
3
3
After use, wipe off the water (such as with a tissue), then apply a
lotion to further moisturize your face and apply an emulsion to
supplement skin oil.
Other ways to use the Ionic Facial Steamer
In addition to using the appliance on bare skin, it can also be used in combination
with facial treatments.
Before cleansing

1. Use the appliance for about 3 minutes. (This lifts dirt from the skin.)
2. Perform cleansing.
Apply massaging cream and use the steam while massaging your skin.

Use the appliance after applying lotions and face creams.


After use

Be sure to discard the water in the tank every time after use.
1
1
Press the power switch until a click is heard to turn off the power
and then remove the plug from the power outlet.
●
The lamp turns off.
●
Be careful not to touch the steam when pressing the switch.
-
Failure to do so may result in burns or scalding.
●
Do not operate the appliance if it contains no water.
-
Doing so will quicken the accumulation of water scale, which may result in
poor steam discharge.
2
2
Leave the appliance to cool for at least 10 minutes.
8
EH2426_USA.indb 8 2011/03/31 13:20:06