Blackmagic Design Teranex Mini Instrucciones De Funcionamiento página 83

Switch 5 – Component, Composite or S-Video
Set switch 5 to OFF to select analog component video input, or to ON for composite video and
S-Video analog inputs.
Switch 4 – Composite – S-Video
Set switch 4 to OFF to select composite video input, or to ON for S-Video input.
Switch 3 – SD to HD
Set switch 3 to 'on' to up convert the SDI or Optical output resolution from SD to HD if the
Composite, S-Video or Component inputs are SD. Set to 'off' to match the input resolution.
Switch 2 – HD to UHD
Set switch 2 to 'on' to up convert SDI or Optical output resolution to Ultra HD if the Component
video input is HD. Set to 'off' to match the input resolution.
Switch 1 – Input Audio / Timecode
Set switch 1 to 'on' to input timecode via the R channel audio XLR connector. Set to 'off' to
input audio.
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the switches,
plus additional settings.
You can access these settings by moving between the 'video,' 'audio,' 'configure,' and
'about' tabs.
The 'about' and 'configure' tabs are detailed in the 'changing settings' section in this manual.
The 'video' tab for Teranex Mini Analog to Optical 12G contains the following settings.
Video Input Menu
This lets you pick between component, s-video, and composite video input as well as setting
the luminance and chroma levels, and the B-Y and R-Y component levels independently.
If you have selected S-Video or composite input, you can additionally choose between 7.5 IRE
and 0.0 IRE black levels, depending on the region you are working in.
If you have selected component video, you can switch between SMPTE and Betacam levels.
SMPTE levels are more common and even Betacam SP decks can use SMPTE levels, so only
switch this to Betacam if you are sure that Betacam levels are being used.
Video Processing Menu
This menu allows you to set up conversion options, dependent on your analog video input.
Component video inputs can be converted from SD to HD, and HD to Ultra HD. S-Video and
composite inputs can only be converted from SD to HD.
The 'audio' tab for Teranex Mini Analog to Optical 12G contains the following settings.
Teranex Mini – Analog to Optical 12G 83