Miche SWR T Serie Manual De Uso página 7

• Insert two keys (A) in the extremity of the hubs (Pic. 1), and turn
them counterclockwise.
• While you are taking out the mobile side, take out from the op-
posite side the complete pin.
• Once you take out the pin from hub' s body, you could, if it is
necessary, change the bearings.
To reassembly it:
• Put the pin into the hub' s body and lock with power the mobile
side with a torque of 15 Nm. If necessary, adjust the hub by wor-
king on the ring (D):
• Unlock the grub screw (E) with a key (B) (Pic1).
• Turn the ring clockwise to drop the sliding, and counterclockwise
to raise the sliding. Lock the grub screw (E).
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed, fai-
lure to do so could lead to a serious or fatal accident.
Warning
!
Use original spare parts exclusively provided by Fac Michelin S.r.l.
Any modification or alteration (also graphic) of the product with
non-original spare parts or spare parts not delivered directly
by Fac Michelin S.r.l., involves the expiration of the guarantee.
REAR HUB
• Insert two keys (A) in the extremity of the hubs (Pic. 2, and turn
them counterclockwise.
• Extract the axel of rear hub with the freehub body (C).
If necessary at this point you can:
• Change the bearings.
• Grease the cogs with low density grease.
• Extract from the axel the freehub body with the relative spacer
(Z) continue the cleaning process of hub.
Warning: the bearings of the freehub body are no replaceable.
• Re-fit the axel (C) inside hub body with the spacer (Z) (Pic. 3) and
take care to position of the pawls positions.
• Lock with power the mobile side with a torque of 15 Nm
If necessary adjust the hub by working on the ring (D) (Pic. 5).
• Unlock the grub screw (E) with a key (B) (Pic. 2).
• Turn the ring clockwise to drop the sliding, and counterclockwise
to rise the sliding.
• Lock the grub screw (E).
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed, fai-
lure to do so could lead to a serious or fatal accident.
Warning
!
Use original spare parts exclusively provided by Fac Michelin S.r.l.
Any modification or alteration (also graphic) of the product with
non-original spare parts or spare parts not delivered directly by
Fac Michelin S.r.l., involves the expiration of the guarantee.
SPOKES
3
The spokes used for the assembly of the wheels have the following
sizes and characteristics.
SWR T38+T38
Right side
Left side
SWR T38+T50
Right side
Left side
SWR T50+T50
Right side
Left side
SWR T88+T88
Right side
Left side
CHANGE A SPOKE
Warning
!
If you have any doubt whatsoever your service-repair ability,
please take your bicycle to a qualified repair shop.
Before any maintenance operations on your wheels, always
wear gloves and protection glasses.
Use only spokes and nipples of the same length and characteri-
stics of those being replaced.
Use original spare parts exclusively provided by Fac Michelin Srl.
FRONT HUB
• Insert two keys (A) in the extremity of the hubs. Turn them
counterclockwise.
• Once you take out the mobile side, if it is necessary take out the
complete pin from the opposite side.
• Take out the damaged spoke, then put in the new spoke (Pic.4).
• If it is necessary put the pin into hub' s body, and lock with power
the mobile side with a torque of 15 Nm.
• If it is necessary, adjust the hub by working on the ring (D), as
explained on the Section 2 / Hubs / Rear hub.
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed, fai-
lure to do so could lead to a serious or fatal accident.
REAR HUB
To change a spoke on the left side of the hub:
• Insert two keys (A) inside the extremity of the hub and turn them
in counterclockwise (Pic.5).
• Once you take out the mobile side, take out the damaged spoke,
then put in the new spoke (Pic.5).
• Lock with power the mobile side with a torque of 15 Nm and,
if it is necessary, adjust the hub by working on the ring (D), as
explained on the Section 2 / Hubs / Rear hub.
• Check the sliding of the wheel.
Please check that the hub is correctly tightened and closed, fai-
lure to do so could lead to a serious or fatal accident.
To change the spokes on the free wheel side of the hub, it is no
necessary to take out the pin from hub' s body.
To ensure the correct spoke tension please follow the indications
Rear wheel Front wheel
274 mm 276 mm
276 mm 276 mm
263,5 mm 276 mm
265 mm 276 mm
263,5 mm 263,5 mm
265 mm 263,5 mm
224 mm 222,5 mm
222,5 mm 222,5 mm
7