Mega Cocina MCDHEPC5 Manual De Instrucciones página 19

It is recommended that the steam is discharged when the indicator is on (not flashing) be-
cause the pressure is lower at this time.
WARNING: Extreme caution must be used. Keep hands and face away from the escaping
steam, as it extremely hot. DO NOT stand over the release valve. Also, make sure the elec-
tric pressure cooker is not under a cabinet as the steam my damage the cabinet.
If you do not want to use the keep warm function simply press the keep warm / cancel button
and the keep warm process will end and the indicator light will turn off.
The unit will automatically turn off after 24 hours.
8. Using the time delay function
If you wish to delay the cooking process press the Delay Timer button to increase the amount
of time the cooking process is delayed. Note: delay time increases and decreases by .5 hour
(30 minute increments). The indicator light on the Delay Timer button will illuminate indicating
that the time delay function is working.
If you accidentally, set the delay for too much time, press the keep warm / cancel button to
cancel the delay function and start over.
When the delay time has expired, the display will show 00 and the indicator light on the Delay
Timer button light will turn off. Pressure will automatically begin to build. This process may
take a few minutes.
2. When the working pressure level has been reached a "P" will display on the left side
of display panel. At this point the pressure holding time (which is displayed on the display
panel will begin to decrease in 1 minute intervals.)
3. When the cooking process is complete you will hear a series of beeps signaling the
completion of the cooking process. The indicator light on the keep / warm cancel button will
flash indicating that the pressure inside the cooker is being released but remains at high
level. NOTE: For reasons of your safety, DO NOT open the lid when the pressure is level is
high and the indicator light on the keep warm button is flashing.
When the pressure level is at a safe level and lid of the pressure cooker can be safely re-
moved the indicator light on the keep warm button will stop flashing and will remain on (solid)
indicating the keep warm function has begun.
9