Phonic PAA6 Manual Del Usuario página 22

5. Exit the SET menu by selecting "OK."
6. Push the onscreen "RUN/STOP" icon or the RUN/STOP button on the left-hand side of the PAA6.
The RTA will begin.
7. Use the touch screen to select an individual band and view the dB SPL in real time for center fre-
quencies of that particular band (figure 24). The rightmost bar is the ALL FREQUENCY level. To
the right of the screen you will find two boxes with channel properties listed. The top value will be
the dB SPL results for the currently selected band, below which you will find the center frequency
of the currently selected band (if the all frequency bar is chosen, this value will read ALLHz). The
weighting that the user selected will be visible below this.
8. A 60 dB range can be seen on the RTA screen at any one time. The total range viewable is 30 dB
to 130 dB. If you find the RTA is clipping constantly, pushing the dBS values to the left of the RTA
display (shown in figure 25) will allow users to scroll up their results (in 5 dB increments).
18
figure 24
figure 25
PAA6