TPD
6.3 Output Menus
To access the Input Menus press the <Channel or Channel> key. Press Exit to finish
editing or again <Channel or Channel> to edit other channels.
Please note that by default the outputs channels are linked in groups of two, as
shown in the following table:
Internal Channel
Subwoofer (SW)
Right
Table 5. Links between internal and auxiliary channels
The following menus are available for each output channel. The options are shown
for the output link composed of the Left output channel and Aux 2 (Out L2).
WARNING: For the specifics prests for Amate Audio loudspeakers (11
to 30) the output menu parameters are only available with the Admin
password.
6.3.1
Gain
Adjust the gain of each output, using the rotary knob.
OutL2
Gain
0.50dB
6.3.2 Mixer [only in Admin mode]
Select the level to be routed from each input by turning the rotary knob. Select 0dB
for maximum level of an input. To disable one input, turn the rotary knob counter-
clockwise until "Off" is displayed. Push the rotary knob to select the next input.
OutL2
Mixer
Input L
The default setting of the mixer is as following:
Output
Subwoofer
Right
*NOTE: This value may change depending on the selected preset
Table 6. Default setting for internal channel routing
20
Aux Channel
Left
0.00dB
Input L
-6.00dB (*)
Left
Display Name
Aux 1
Out SW1
Aux 2
Aux 3
OutL2
Mixer
Input R
-6.00dB(*)
0 dB
Off
Jul 2016
Out L2
Out R3
Off
Input R
Off
0 dB
Amate Audio