Dx2 With Lcd Screen; Start The Steering / Control Unit; Switch Off The Steering / Control Unit; Lock The Steering / Control Unit - Vermeiren DX2 Basic Manual De Instrucciones

1.2. DX2 with LCD screen

Start the steering / control unit

Press the ON/OFF button (2) and the operating display (6) will briefly flash on and the
screen will show the drive level (1-5) last used.

Switch off the steering / control unit

Press the ON/OFF button (2) and the system will switch off.

Lock the steering / control unit

If you keep the ON/OFF button (2) pressed for longer than 4 seconds, the operator control
4 secs.
will be locked.
The lock symbol will briefly appear in the display.

Unlock the steering / control unit

When the ON/OFF button (2) is pressed ...
... the lock symbol will appear in the display.
When you press the horn button (5) twice while the lock symbol is showing, the control
2 x
unit will be unlocked. The drive level (1-5) last used will appear in the display (1-5).
Switch the indicators on/off
To switch the drive direction display on and off, press buttons (3) or (4) for whichever
indicator you wish, left or right. When you activate a drive direction, it will flash in the status
display.
or
The function buttons (8), (9) and (10)
enable functions to be selected that
are displayed in the assigned fields on
the screen.
The status display is constantly visible
in the upper part of the display and
always shows the batteries' charge
level and the current time.
The light, indicator and warning light
displays
relevant function is selected. The
system status display appears when
there is a fault or an event, and
displays the relevant event or fault
code (1-12).
Display
10
DX2 Operator control
vD - 2013-04
only appear when the
Meaning
Battery fully charged
Battery fully charged
Battery half charged
Battery will soon be low, charge
it
Battery is low, charge it soon
Battery is dead, charge now