Outing Function - Panasonic CZ-RTC2 Manual De Instrucciones

Display Section
1.
Appears when the timer program is being set.
2.
Indicates the unit No. of the indoor unit which
is selected with the Unit select button, or the
unit in which an abnormality occurs.
3.
Appears when the time program is being set.
4. Timer program indication
programmed time.
programmed time.
5. (Today's day of the week) indication
Indicates today's day of the week.
6. (Program schedule) indication
Appears under days that are scheduled for
program operation.
7. Present time indication
Displays the present time on a 24-hour clock.
Also, displays settings in the various setting
modes.
8.
Displayed when the timer has been turned OFF.
9.
Displayed when a mistake is made during
timer setting.
10.
function)
Appears when the outing function is set.
CZ-RTC2_Main.indb EN-3 CZ-RTC2_Main.indb EN-3
(Refer to page II)
(Setting) indication
(Unit) indication
(Timer No.) indication
: The indoor unit starts operation at the
: The indoor unit stops operation at the
(Timer off) indication
(Error) indication
(Outing) indication ( Outing
11. Upper and lower limit indication of the

outing function

: Indicates the upper limit of the
temperature
: Indicates the lower limit of the
temperature
12. Operation Mode indication
Displays the selected operation mode.
(AUTO /HEAT
FAN ).
13. Temperature indication
Indicates the set temperature.
14. ˚F / ˚C (Temperature unit) indication
15. (Remote control sensor) indication
Appears when the remote control sensor is
used.
16. (Centralized control) indication
Appears when operated in centralized control.
If the remote control operation is not permitted
to the remote unit, when the Start/Stop button,
Mode select button or Temperature setting
button is pressed,
change.
EN-3
/DRY /COOL /
fl ashes and rejects the
2011/11/04 20:08:01 2011/11/04 20:08:01
EN