Connections, Controls And Indicators - Cameo CLSTORM Manual De Usuario

CONNECTIONS, CONTROLS AND INDICATORS:

2
3
LED DISPLAY
1
The four digit LED display indicates the operating mode and other system information.
DMX LED
2
The LED is lit when the DMX control mode is enabled.
SOUND LED
3
The LED is lit when the music control mode is enabled.
4 AUTO LED
The LED is lit when the automatic control mode is enabled.
SLAVE LED
5
The LED is lit when the slave control mode is enabled.
CONTROL BUTTONS
6
MODE: Selecting the different operating modes.
ENTER: Confi rming of program selection and value changes.
UP and DOWN: Selecting a program, changing the program speed and DMX address.
7 MICROPHONE
Microphone for music control.
SENSITIVITY
8
Controls for adjusting the microphone sensitivity in the music mode control and music control in DMX mode.
When turned to the left, the sensitivity is lowered, when turned to the right, it is increased.
DMX IN
9
3-pin male XLR socket for connection of a DMX controller (e.g., DMX mixer).
DMX OUT
10
3-pin XLR socket for looping through the DMX control signal.
1
4
7
5
6
8
10
9
9