Transport And Handing - CORBERO CF SBS 618 NF W Manual Del Usuario

TRANSPORT AND HANDING

When transportation, hold the base and lift the
refrigerator carefully with an angle inferior at
45 degree. Never hold the door handle as support.
Never place it upside down nor horizontally. Push
refrigerator on its basis and place it thanks to its roller
feet.
INSTALLATION
To fix stably, the appliance must be placed on a flat
and solid surface. It should not be laid on any soft
material.
Choose a location where there is no heat source.
Keep the refrigerator away from direct sunlight or
other appliance producing heat. Choose a dry and
well-ventilated place where there is no corrosive air.
In order to improve efficiency of the cooling system
and save energy, it is necessary to m a i n t a i n g o o d
v e n t i l a t i o n a r o u n d t h e appliance for the dissipation
of heat. For this reason, sufficient clear space should
be available around the refrigerator. Suggest: It is
advisable for there to be at least 75mm of space from
the back to the wall, at least
100mm from its top. The sides please refer to below
diagram. A clear space is in front to allow the doors to
open 135° .