Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
The motor
runs
continuously
A layer of
frost occurs in
the
appliance
Temperature
inside is too
warm
Temperature
inside is too
cold
Doors can't
be closed
easily
Water drips
on the floor
Possible cause & Solution
· Large quantity of warm food has
recently
been
appliance.
· The
temperature
appliance is too high.
· Doors are kept open too long or too
often.
· After your installing the appliance or it
has been switched off for a long time.
Check that the air outlets are not blocked
by food and ensure food is placed within
the appliance to allow sufficient ventilation.
Ensure that door is fully closed. To remove
the frost, please refer to cleaning and care
chapter.
You may have left the doors open too long
or too frequently; or the doors are kept
open by some obstacle; or the appliance
is located with insufficient clearance at the
sides, back and top.
Increase the temperature by following the
"Display controls" chapter.
Check
whether
refrigerator is tilted back by 10-15mm to
allow the doors to self close, or if something
inside is preventing the doors from closing.
The water pan(located at the rear bottom
of the cabinet)may not be properly
positioned to direct water into this pan, or
the water spout is blocked. You may need
to pull the refrigerator away from the wall
to check the pan and spout.
stored
within
outside
the
top
the
the
of
the
Tabla de contenido
