Idiomas disponibles
Idiomas disponibles
instructions given in the paragraph General
Care and Cleaning. This will result in the
removal of possible dust particles from the
sole plate and subsequently lessen the smell
typically encountered when first switching
on.
Ensure sufficient ventilation.
Steam output control
The steam output control is used to adjust
the steam output.
Before using the steam jet function, turn the
steam output control to its max position.
Steam will be emitted after 40-60 seconds.
Now set the control to the desired position.
The main indicator light (for the pump)
flashes whenever the pump is working.
Ironing
●
Steam
ironing
temperatures. The temperature level for
steam ironing is indicated on the
temperature control knob.
- Fill the water reservoir with clean tap
water.
- Place the iron onto its rest and insert the
plug into a suitable wall socket.
- Set the temperature control knob to the
required ironing temperature according
to the ironing symbols.
- As the iron heats up, the indicator lamp
on the iron will be on. It goes out once
the required ironing temperature is
reached.
●
Before starting to iron, the sole plate
should be cleaned by passing it over a
clean cotton cloth, while using the steam
jet function; this helps to flush out any
dirt residues or lint particles trapped
inside the openings in the sole plate.
●
When the steam jet button is depressed,
the sound of the pump increases, as
residual air is pumped out of the boiler.
When using the steam jet function, first
turn the steam output control to its max
position. Steam will be emitted after 40-
60 seconds.
- Use the steam output control to select
requires
high
the required steam output.
- You can now start ironing.
●
If, during ironing, the water reservoir
becomes empty, simply re-fill it as
described in the section 'Filling with
water'.
●
Replace the iron on its rest on the steam
generator after use, and remove the plug
from the wall socket.
Steam jet
When the steam jet button is depressed, jets
of steam are emitted through the openings in
the sole plate. This function can be very
useful when removing stubborn creases or
when ironing difficult or thick fabrics.
The steam jet function may also be used
with the iron held vertically, to remove
creases or wrinkles from fabrics.
General care and cleaning
●
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
●
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
●
Do not use abrasives or harsh cleaning
solutions.
- If necessary, the appliance may be wiped
with a dry lint-free cloth.
Iron
- Starch, fat and other deposits on the sole
plate may be removed with a woollen
cloth soaked in a vinegar/water solution.
- In order to protect the clean sole plate,
occasionally apply a small amount of
paraffin to the warm plate, wiping it off
with a woollen cloth.
To empty any water remaining in the
reservoir
After use, any remaining water must be
removed from the reservoir.
- Remove the water reservoir.
- Pour out any remaining water through
the filler opening.
10
