Layout - Storage - Eurocave Classic Serie Modo De Empleo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Your EuroCave wine cabinet was designed to be adaptable. In terms of storage capacity, it adapts to your needs: equipment can be changed or
added to if your requirements change.
Different types of storage
Universal storage shelf
Capacity: 77 bottles
Maximum weight: 100 kg
Bordeaux storage shelf
Capacity: 78 bottles
Maximum weight: 100 kg
Display shelf
Capacity: 22 bottles
Advice for the layout of your wine cabinet
Your EuroCave wine cabinet was designed to safely hold a maximum
number of bottles. We recommend that you follow the advice below in
order to optimize loading.
Distribute your bottles as uniformly as possible over the various cabinet
shelves, in order to spread the weight. Also make sure that your bottles
do not touch the back wall of the cabinet.
Also ensure that you distribute your bottles uniformly over the height
of the cabinet (do not load the bottles all at the top or all at the
bottom).
Observe the loading instructions specific to your cabinet's type of
storage equipment, and never stack bottles on a sliding shelf.
If you have sliding shelves, it is best to position them in the upper section
of your cabinet to facilitate daily access to them.
Adding sliding shelves
When you purchase your cabinet, the sliding shelves are already adjusted
to ideally suit the internal dimensions of your appliance. If you buy a
new sliding shelf, you may need to carry out this adjustment. To do so,
unscrew the screws 1 of the first right or left runner 2 (2 screws) then
position the runner at the desired width and screw the screws. Repeat the
procedure for the second runner (if necessary).
N 83V2-0511.indd 25
Ref: AXUH
Ref.: AXBH
Ref.: ACPH
6 - l
ayout
Universal sliding
shelf with "Main du
sommelier" supports
Ref.: ACMS
Capacity: 12 bottles
Sliding serving shelf
Ref.: ACVH
Capacity: 20 bottles
Sliding Champagne
The layout of your cabinet can be
shelf
changed to suit your requirements.
Ref.: ACHH
Refer to page 72-78 to see storage
Capacity: 10 bottles
simulations.
In the same way, position one or two bottles of each of your various
wines on the sliding shelves and keep your spare bottles on the storage
shelves. You then simply replace bottles when they are consumed.
When using your wine cabinet, never pull out more than one sliding
shelf at a time.
N.B: Never change the position of the stiffener in
your 283 cabinet (see description, page 5) without
first consulting your retailer and never move this
part when your cabinet is loaded.
- s
torage
Magnum sliding
shelf with "Main du
sommelier" supports
Ref.: ACGMS
Capacity: 7 bottles
Articulated display kit
for ACMS shelves
Ref.: AOPRESAR
Capacity: 32 bottles
23/06/11 11:52 AM
25
EN
Tabla de contenido
loading

Tabla de contenido