Checking/Replacing Battery - Num'axes Canicalm Premium Manual De Instrucciones

Diagram. 2
MAXIMUM
sensitivity

Checking/Replacing battery

To check the condition of the battery, you have to press the button to change the operating mode.
If the collar emits a continuous beep when you press the button, the battery is weak. Prepare to replace it.
When the battery is too weak, the product works under safety mode, which means that it is out of use.
You need to replace the battery by a new one of the same type (3 volts CR 2 lithium battery). Do as
follows:
- Remove the 4 screws from the battery cover.
- Remove the battery cover.
- Remove the old battery.
- Insert the new battery paying attention to the polarity indicated on the battery housing (See
Diagram 1).
Beep sounds are emitted indicating the collar is ready to use.
If you do not hear any beep sound after inserting the battery, immediately remove it from its
housing. Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new
purchased product. Other brands of batteries may not operate, or may not be completely compatible
with your product.
You can purchase the suitable batteries from NUM'AXES or from your distributor.
NB: Due to greater use during your dog's training, your first battery may not last as long as
replacement batteries.
ide CANICALM Premium I 110x115.indd 14
MEDIUM sensitivity
MINIMUM
sensitivity
Gb - 14
18/05/2017 08:4