Checking/Replacing Battery - Num'axes CANICALM PREMIUM Manual De Instrucciones

Diagram. 2
MEDIUM sensitivity

Checking/Replacing battery

MAXIMUM
sensitivity
To check the condition of the battery, you have to press the button to change the operating mode.
If the collar emits a continuous beep when you press the button, the battery is weak. Prepare to replace it.
When the battery is too weak, the product works under safety mode, which means that it is out of use.
You need to replace the battery by a new battery of the same type (3 volts CR 2 lithium battery). Do as
follows:
- Remove the 4 screws from the battery cover.
- Remove the battery cover.
- Remove the old battery.
All manuals and user guides at all-guides.com
- Insert the new battery paying attention to the polarity indicated on the battery housing (See
Diagram 1).
Sound beeps are emitted indicating the collar is ready to use.
If you do not hear any sound beep after inserting the battery, immediately remove it from its
housing. Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new
purchased product. Other brands of batteries may not operate, or may not be completely compatible
with your product.
You can purchase the suitable batteries from NUM'AXES or from your distributor.
MINIMUM
sensitivity
Gb - 14