Troubleshooting; Main Sources Of Error; Transmission Error; Checklist - IEM Mobil-O-Graph Serie Manual De Instrucciones

Troubleshooting

5 Troubleshooting

5.1 Main sources of error

The following can cause error measurements or unwanted results:
▪ The patient's arm moving during measurement
▪
Device being switched off (e.g. at night)
▪
Incorrect cuff size put on
▪
The cuff slipping while being worn
▪
Lack of successful manual measurement in the
doctor's practice
▪
Not taking the medication

5.2 Transmission error

To avoid an error during data transmission, the blood pressure monitor includes a check of the data sent. If an
error has occurred, E004 will appear on the display.

5.3 Checklist

▪
Please go through the following checklist if you have encountered errors when handling the Mobil-O-
®
Graph . Many errors have simple causes.
▪
Check that all cables are firmly connected and/or that the infrared interface is correctly aligned with the
device.
▪
Check if the blood pressure monitor, computer and printer are switched on (depending on the version you
have received).
▪
Check that the connection cable is connected to the correct serial interface (COM1 to COM4).
▪
Check that the power packs are sufficiently charged.
102
▪
Incorrect log set
▪
Not fully charged, incorrectly charged or
outdated power packs used
▪
Kinking or knotting of the cuff tube
▪
External interference factors such as, for
example, physical activity or driving or using
public transport during measurement may
result in so-called motion artefacts or incorrect
measurements.