Domo DO7102S Manual De Instrucciones página 45

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
www.domo-elektro.be
The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local standards and requirements.
Only use the utensils delivered with the appliance.
To protect against electrical shock or burns, do not immerse unit, cord, or plug in
water or other liquid.
Do not operate the appliance with wet hands.
Unwrap the cord completely to prevent overheating of the cord.
Do not let the power supply cord touch hot surfaces.
Only fill the water reservoir with no other liquid than water.
Make sure the appliance is correctly assembled, then plug the cord in the wall
outlet. To disconnect, turn controls to "OFF" or "0" position, then remove the plug
from the wall. Never pull the cord or appliance to remove the plug from the socket.
Failure to maintain this appliance in a clean condition could adversely affect the
life of the appliance and possibly result in a hazardous situation.
Any injury or damage caused by failure to comply with these rules are at your own
risk. Neither the manufacturer, importer, or the supplier may be held liable.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
PARTS
1.
Filling cap
2.
Trigger for removing the water tank
3.
Handle
4.
Water tank
5.
Steam release button
6.
Soleplate
7.
Temperature dial
8.
Temperature indicator
9.
Iron
10. Thermal insulation pads
11. Steam generator
12. Cord clamp
1
2
3
4
5
6
10
12
8
11
45
DO7102S-DO7103S
7
9
Tabla de contenido
loading

Este manual también es adecuado para:

Do7103s

Tabla de contenido