Amica PG4VQ247CF Manual De Instrucciones página 41

OPERATION
Selecting a cooking zone
Touching the cooking zone selection sensor
field (2) activates the individual cooking zo-
nes. A cooking zone is active when a number
is flashing on indicator (3). We can then
change the power level settings for a chosen
cooking zone using the (+) sensor field (5)
or the (-)(4) or switch off the cooking zone
by touching simultaneously (+)(5) and (-)(4).
After 10 seconds the cooking zone becomes
inactive, and to make further changes the
cooking zone should be reactivated using
the sensor field (2).
Activation of the cooking zones always begins from the front right cooking
zone and is changed clockwise by touching sensor field (2).
Setting the heating power
In order to set the heating power, first select
the desired cooking zone using the cooking
zone selector sensor (2). Then, when the
cooking zone indicator (3) shows "0" and
a digit is flashing, start setting the required
heating power using the (+) sensor (5) or the
(-) sensor (4).
If you do not wish the automatic warm-up
function to operate, start the heating po-
wer selection by touching the (-) sensor (4)
first. You can then gradually increase the
heating power by operating the (+) sensor
field (5), or lower the heating power setting
by operating the (-) sensor (4).
If, however, you do wish to cook using
the automatic warm-up function, start
heating power selection by touching the
(+) sensor (5) first. (see „automatic warm-
-up function")
2
2
41
3
5
4
3
4 5
4
5