Bestron AMC1000B Manual Del Usuario página 27

instruction manual
advisable to reduce the vacuum suction when
cleaning upholstered furniture and curtains.
This will prevent the fabric from being sucked
into the nozzle.
If so required, you can also reduce the suction
quickly by moving the slide on the hose grip.
oPerAtion - StorAGe AFter uSe
1. Remove the plug from the wall socket.
2. P ress the rewind button and keep it pressed in;
the power cord will automatically rewind onto
the reel.
Guide the power cord whilst it rewinds onto the
reel, since otherwise the cord could become
tangled or the plug could strike the back of the
appliance. Take hold of the power cord near the
mark, and allow it to gently slide through your
fingers back into the appliance (see figure 5).
3. An attachment slot for the combi nozzle is fitted
to the back of the vacuum cleaner.
This avoids the need to dismantle the vacuum
cleaner after use; you can store the assembled
appliance and retrieve it again quickly when you
need it.
CleAninG And MAintenAnCe - Cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CleAninG And MAintenAnCe - removing waste from the dust receptacle
27