WARNING!
Risk of injury due to electric shock!
There is a risk of electric shock due to live cables and
wiring.
Install the device in a suitable location, and take care
not to hit any hidden electrical cables or pipework
when drilling.
In each case, drill two holes into the wall,
parallel to each other (diameter 6 mm,
depending on the wall construction).
The holes must be 764 mm apart.
Push the dowels into the drilled holes.
Tighten the screws on the wall brack-
et, as shown. Ensure that the eye for the
soundbar has the narrow part pointing
downward, see Fig. a.
Use raised countersunk-head screws for
this (e.g. 3.5 mm x 45 mm)
Loosen both outer screws on the sound-
bar until it can be mounted on the wall
bracket.
Place the soundbar onto the wall brackets and then gently push the soundbar
downwards until the screws engage in the wall brackets.
764mm
764mm
SOUR CE
VOL
VOL
2 m m
DE
FR
ES
IT
NL
EN
173