Milwaukee 2311-20 Manual Del Operador página 5

Inserting/Removing the Memory Card
1. Open the protective cover to access the memory
card slot.
2. Slide the memory card into the slot, the top of
the card should face away from the LCD screen.
Press in the card securely. It should click in
place.
3. Close the protective cover.
4. To remove the memory card, press it in and
release. It will pop out.
Fig. 2
SD Memory card
Note: When the memory card is "locked"
with the write-protection tab in the lower
position, the Locked
played when taking a picture or movie
is attempted. No pictures or movies can
be saved to the memory card.
The number of pictures that can be taken or movies
recorded is based on the size of the memory card. If
the memory card is full, the Full F icon is displayed
when taking a picture or movie is attempted. Noth-
ing additional is saved to the memory card.
Downloading to a Computer
Insert the interface cable into the port on the side
of the tool. Connect the USB end into the USB port
on your computer.
NOTE: If you are unable to view the videos on
your computer it may be because your computer
is missing the DIVX or XVID codec. The AVI file
is recorded in MPEG4 format and your computer
needs a DIVX or XVID codec to decode and play
it. For more trouble shooting tips, instructions and
a link to download the missing codec, please go to
Milwaukeetool.com, and then search the key words
"M-Spector AV".
Protective cover
Interface
port
icon will be dis-
Set-up Menu
To enter the set-up menu, turn on the tool and press
the Playback
select Set-up Menu
is also available from other Playback screens.
language:
Use the
guage.
Press the Select button.
Use the
language to be displayed.
Press the Select button to accept.
format:
Use the
Press the Select button. "ERASE ALL DATA" is
displayed.
• Select NO to return to the menu without
erasing all memory card data.
• Select YES to erase all memory card data.
factory default:
Use the
Default.
Press the Select button. "RESTORE DEFAULT"
is displayed.
• Select NO to return to the menu without
restoring factory defaults.
• Select YES to restore all factory defaults.
flicker filter (50/60 hz):
Use the
Filter.
Press the Select button.
Use the buttons to highlight "50 Hz" or "60 Hz".
Set to "60 Hz" for North America use.
Press the Select button to accept.
date/Time:
Use the
Time.
Press the Select button.
Use the
to be displayed on the pictures and movies.
Press the Select button to accept.
screen brightness:
Use the
ness.
Press the Select button.
Use the buttons to change LCD brightness.
Press the Select button to accept.
5
button. Use the
. Note: The Set-up Menu
buttons to highlight
buttons to select the desired
buttons to highlight
buttons to highlight
buttons to highlight
buttons to highlight
buttons to set the date and time
buttons to highlight
buttons to
Lan-
Format.
Factory
Flicker
Date/
Bright-