General Description Of Equipment; Equipment Operation; Equipment Commissioning - Marse MA-2 Manual De Instrucciones, Uso Y Mantenimiento

Ind.Y Cial. Marse, S.L.

1. GENERAL DESCRIPTION OF EQUIPMENT:

Manufactured in AISI-304 stainless steel for easy cleaning and longer life, with an electronic
panel allowing suction time to be regulated as required, maintaining a constant flow of
material in the machine hopper, reducing the loading time and automating the feeding
system of your industry.
The mono-phase MA-2 /MA-3 / MA-7 /MA-8 vacuum loader comprises a suction pump, a
filter, a tank or material collector, suction tube with its nozzle and electronic/magnetic
operation control.

2. EQUIPMENT OPERATION:

The motor sucks air from the tank, producing a vacuum inside same with respect to the
atmospheric pressure, obtaining a suction flow in the tube placed in the plastic material
recipient of the user, which is absorbed and left inside the vacuum loader.
When the programmed loading time has passed, the motor stops and the material is
automatically placed in the machine hopper. When all the material from the feeder tank has
fallen into the hopper and the lower hatch returns to its initial position, the cycle is
completed. This is repeated until the machine hopper is full.

3. EQUIPMENT COMMISSIONING:

Position equipment on the hopper, securing the base with screws.
Connect the plastic tube to the feeder inlet, with the tube mesh in direct contact with the
housing, to reduce any static electricity produced by the material flow. Submerge the
stainless steel nozzle inside the recipient where the material to be transported is stored.
Check that the filter is correctly fitted and close the upper cover of the accumulator tank.
Connect the power supply to the control panel using the sheathed cable supplied
(220V/50Hz+Earth). Connect the switch (start-stop) located on the control panel.
English-01
- 16 -