Idiomas disponibles
Idiomas disponibles
Remote control
2. Press EDIT to enter edit mode. Refer to the following:
(The flashing digit represents the furthest position from the cursor and
can be edited with the numeric keypad by remote control) Clock setting:
the display shows, for example, H1 00: 00. Enter the current time by
pressing EDIT and enter the digits, then press Enter , to save the edited
data.
(H1 represents the 24H time format, while H2 represents the 12H time
format. The 12H and 24H formats can be switched by pressing the
12/24H change button).
General adjustments:
Countdown instruction:
Example 1 : 30-minute countdown operation instruction:
1.press
2.Press
3.Press
START
Example 2: 20 minutes countdown operation instruction:
1.Press
Down
EDIT
2.Press
START
3.Press
Alternating timing mode instruction
1.Store one of the alternate timing programs in number 1.
(F1=20s, C1=18s,F2 =15s, C2=12s round=3)
Press the number 1, the timer displays P1. Press F-A to enter training time 1, to edit
the timer display F1, enter 00 20, and press ENTER to save the data.
Press C-U in the idle time, the timer displays C1-, enter 00 18, press ENTER to save
the data, then press F-A again to enter training time edit 2, the timer displays F2-,
enter 00 15
to enter count-up mode; it displays UP 00: 00
to edit 30: OO. Press
to start 30 minutes count up.
to enter countdown mode; it displays dn 00: OO.
to edit 20: 00, press
to start 20 minutes countdown.
to save the data.
to save the edited data.
Enter
21
