Idiomas disponibles
Idiomas disponibles
•
3. Sliding Rail
1.Find the sticker "QC pass"
on the honeycomb panel
inside the tent, tear off the
sticker firstly.
3. The screw hole on the track is aligned
with the screw hole on the tent bottom
plate. The nut slides into the track from
both sides to the screw hole, and the screw
is connected with the nut through the
track screw hole.
2.Ladder
1. Align the ladder connector
with screw holes on the bed plate.
3. Use Locking shim screw to connect
the ladder connectors and the ladder.
lnstall steps
4.Tighten the screw with a wrench.
2. The long screw passes through
the screw hole under the bed plate
and fasten the nuts tightly.
16
2.Use a long screw to pass
through the screw hole
under the sticker.
4. Turns the nut tightly.
