Idiomas disponibles
Idiomas disponibles
Display outdoor temperature:
Press "CHANNEL" button (B3) to view the 3 Channels' temperature. The
sequence is shown as follow:
Press
"CHANNEL" button
Hold "CHANNEL" button (B3) for 3 seconds to cancel unused channel manually.
It will automatically register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel ("- - . –" is displayed on
the LCD), hold "CHANNEL" button (B3) for 3 seconds to cancel that channel and
receive the channel again ( "Beep" sound can be heard.) Then, press "TX" button
(D6) on the thermo sensor unit to transmit signal to the main unit manually
The trend pointer displayed on the LCD indicates the trend of the outdoor
temperature.
"
"
"
" indicates the outdoor temperature is decreasing.
Press "ºC /°F" button (D4), on the Thermo Sensor unit, to select Thermo Sensor
displayed in Celsius mode or Fahrenheit mode.
Temperature Alert function:
Hold "ALERT" button (B2) for 3 seconds to enter Temperature Alert setting,
Temperature's digits flash.
Press "+" (B8) or "-" (B7) button to select Indoor or Outdoor CH1, CH2 and CH3
temperature alert. Press "ALERT "button (B2) to confirm the setting.
Press "+" (B8) or "-" (B7) button to set the upper "
the temperature. Press "ALERT "button (B2) to confirm the setting.
Press "ALERT" button (B2) to set the Temperature Alert function on or off (" "
appears on the LCD if this function is on).
Press
"CHANNEL" button
" indicates the outdoor temperature is increasing.
" indicates the outdoor temperature is steady.
"CHANNEL" button
" and lower " " limit of
7
Press
Display the three
channels alternatively
