Idiomas disponibles
Idiomas disponibles
Thermo Sensor Unit Appearance
D1: Outdoor Temperature
D3: Wall Mount Hole
D5: "Channel Select Switch"
D7: Battery Compartment
Set Up:
Insert batteries.
Use a pin to press the RESET (B10) button
Starting up the Main Unit:
The clock automatically starts scanning the RF 433 MHz signal to register new
Thermo Sensor Unit after new batteries inserted, "--.-" flashes on the outdoor
temperature. After registered new channels or press "CHANNEL" button (B3),
scanning stops. All buttons will not function when scanning for Thermo sensor's
signal unless they are well received or stopped manually.
Time Setting:
Hold "MODE" button (B5) for 3 seconds to enter Clock/Calendar setting mode.
Press "+" (B8) or "-" (B7) buttons to adjust the setting and press "MODE" button
D2: Transmission Indication LED
D4: "ºC/ºF" button
D6: "TX" button
D8: Temperature Sensor Probe and Plug
3
