Idiomas disponibles
Idiomas disponibles
Maximum/Minimum Indoor /Outdoor Temperature and Humidity Recording
Function:
Press "MAX/MIN" button (B5) to show the maximum recorded Indoor /Outdoor
Temperature and Humidity.
"
" is shown on the LCD
Press "MAX/MIN" button (B5) again to show the minimum recorded
Indoor/Outdoor Temperature and Humidity.
"
" is shown on the LCD.
Hold "MAX/MIN" button (B5) for 3 seconds to clear the recorded maximum and
minimum reading.
Thermometer:
Press "-(°C / °F)" button (B7) to select Indoor/Outdoor Temperature in Celsius
mode/ Fahrenheit mode.
Outdoor Thermo Sensor Unit Registration Procedure:
The main unit automatically starts receiving transmission from Outdoor Thermo
Sensor for outdoor temperature after new batteries are inserted.
The thermo sensor will automatically transmit temperature to the main unit after
batteries inserted. Batteries compartment (D7) of thermo sensor is locating behind
the back cover, unscrews to open.
For having more than one external transmitter (Maximum 3), select the Channel,
CH1, CH2 or CH3 to ensure each thermo sensor is transmitting difference channel
before inserting batteries. The channel select switch (D5) is at the back of the
thermo sensor.
Press " TX " button (D6) on the thermo sensor unit to transmit temperature to the
main unit manually. The main unit gives a "beep" sound if it received the
temperature.
The use of 1.5m cord Temperature Probe:
Insert the probe plug (D8) to the jack on the right hand side of the Thermo Sensor
Unit.
Put the metal casing outside and leave the Thermo Sensor Unit in a indoor area to
avoid freezing up the battery when the outdoor temperature is below -20 °C.
Always use the temperature probe to sense the temperature when the temperature
is between the following range:
-50 °C ~ 0°C and +50°C ~ + 70°C
6
